Please use this identifier to cite or link to this item: https://elib.belstu.by/handle/123456789/32480
Full metadata record
DC FieldValueLanguage
dc.contributor.authorShymanskaya, Hanna N.-
dc.contributor.authorDyatlova, Evgeniya M.-
dc.contributor.authorPopov, Rostislav Yu.-
dc.date.accessioned2020-02-03T10:43:29Z-
dc.date.available2020-02-03T10:43:29Z-
dc.date.issued2020-
dc.identifier.citationShymanskaya, H. N. Refractory clay raw materials of Republic of Belarus for production of the porcelain tile / Shymanskaya H. N., Dyatlova E. M., Popov R. Yu. // Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol. - 2019. - V. 62.- N 12. - p. 39-44ru
dc.identifier.urihttps://elib.belstu.by/handle/123456789/32480-
dc.description.abstractThe possibility of replacing imported refractory clays and kaolines, which are part ofporcelain stoneware mix, with refractory clay materials of the Republic of Belarus, in particular quartz- pyrophyllite-kaolinite rock and kaolin of “Dedovka” and “Sitnitsa” deposits, was explored. Porce- lainised stoneware body formulations of JSC “Keramin” (Minsk, Republic of Belarus) was taken as the basis. It was found that physico-chemical properties and operational characteristics ofporcelain tiles comply with the requirements of EN 14411: 2014, when adding 2.5-15.0 wt.% quartzpyrophyllite-kaolinite rock. Incorporation o f quartz-pyrophyllite-kaolinite rock in percentage higher than 15.0 wt.% resulted in reduction in the total amount o f the vitreous phase ofporcelain stoneware, thus increasing water absorption, apparent porosity as well as reduces flexural strength and bulk density. The main crystalline phases in the synthesized materials were quartz and mullite. It was also revealed that imported kaolines could be completely replaced by kaolines o f “Dedovka” and “Sitnitsa” deposits. In this, required physico-chemical properties and operational characteristics of porcelain tiles was maintained. SEM analysis revealed that specimens synthesized using considered kaolines show quite dense microstructures, with a high degree o f vitrification. The gas phase in these materials was practically absent, the presence o f only individual small irregular pores was found. XRD analysis indicated that the major phases were mullite, quartz, microcline and hematite. It was hematite that gives the obtainedporcelain stoneware samples a dark gray color scheme. Thus, the use of domestic refractory clay raw materials provides import substitution and declining production costs.ru
dc.format.mimetypeapplication/pdfru
dc.language.isoenru
dc.subjectporcelain stoneware tileru
dc.subjectquartz-pyrophyllite-kaolinite rockru
dc.subjectkaolinru
dc.subjectwater absorptionru
dc.subjectflexural strengthru
dc.subjectmulliteru
dc.subjectкерамогранитru
dc.subjectкварц-пирофиллит-каолинитовая породаru
dc.subjectкаолинru
dc.subjectводопоглощениеru
dc.subjectмеханическая прочность при изгибеru
dc.subjectмуллитru
dc.titleRefractory clay raw materials of republic of belarus for production of the porcelain tileru
dc.typeArticleru
dc.identifier.udc666.3-128-
dc.identifier.DOI10.6060/ivkkt.20196212,6018-
Appears in Collections:Публикации в зарубежных изданиях

Files in This Item:
File Description SizeFormat 
Shimanskaja.pdf646.96 kBAdobe PDFView/Open



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.