Please use this identifier to cite or link to this item:
https://elib.belstu.by/handle/123456789/56279
Title: | Simulation of the forging process with an additional macro-shift in “deform” software package |
Authors: | Lezhnev, Sergey Naizabekov, Abdrakhman Panin, Evgeniy Kuis, Dmitry Stepankin, Igor |
Keywords: | forging ковка broaching протяжка shear deformation деформация сдвига computer modeling компьютерное моделирование stress-strain state напряженно-деформированное состояние |
Issue Date: | 2022 |
Citation: | Simulation of the forging process with an additional macro-shift in “deform” software package / S. Lezhnev [et al] // Journal of Chemical Technology and Metallurgy. - 2022. - Vol. 57, № 1. - P. 195-204. - Bibliogr.: 15 nam. |
Abstract: | The paper presents the results of computer simulation of the process of forging round blanks in the strikers of the new design. It is shown that the use of a radial joint of the faces has a favorable effect on the stress distribution along the entire length of the metal-tool contact. The analysis of models with different angles of inclination of flat faces showed that the best option is to use strikers with an angle of 30°, since in this case a fairly extensive distribution of strain over the cross section occurs in the workpiece with a significantly lower deformation force than when using strikers with an angle of 0°. The analysis of the technological parameters influence on the microstructure evolution showed that the most optimal workpiece heating temperature is 1000°C, while all 3 variants of the punch speed can be recommended for the implementation of this process in practice. |
URI: | https://elib.belstu.by/handle/123456789/56279 |
Appears in Collections: | Статьи в зарубежных изданиях |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Lezhnev_Simulation.pdf | 1.82 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.