2024-03-29T00:55:38Zhttps://elib.belstu.by/oai/requestoai:elib.belstu.by:123456789/65042020-10-21T07:36:47Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Dubovik, A. A.
author
Gorzhanov, V. V.
author
Shkirando, T. P.
author
Penkin, A. A.
author
Solovyeva, T. V.
author
2012
Papermaking properties of recycled pulp obtained from office paper, thermomechanical and chemithermomechanical pulp were investigated. The optimal refining parameters of recycled pulp and chemithermomechanical pulp such as refining time, rotational disk speed and refiner disk gap, allowing to increase their papermaking properties, were determined. It was found that recycled pulp exhibits the greatest efficiency (among the pulps under investigation) of chemical pulps replacing in the furnish composition of offset printing paper.
Papermaking properties of various pulps used for printing paper production / A. A. Dubovik [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 124-126
https://elib.belstu.by/handle/123456789/6504
676.1:676.22
бумага для печати
бумагообразующие свойства
вторичное волокнистое сырье
переработка макулатуры
Papermaking properties of various pulps used for printing paper production
oai:elib.belstu.by:123456789/64912020-10-21T07:36:44Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Kukhta, T. N.
author
Prokopchuk, N. R.
author
2012
The combined effect of artificial climatic factors (ultraviolet irradiation, moisture, temperature) on mechanical properties and surface structure of polymer films derived from powder paints is studied in this article. Methods and equipment for researches are also described. The effect of chemical structure of the film-forming material and hardening agent on the spatial grid structure that defines mechanical properties of the film and their change under climatic factors is reviewed.
Kukhta, T. N. Change of properties and structure of films derived from powder paints in the process of artificial climatic aging / T. N. Kukhta, N. R. Prokopchuk // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 71-76
https://elib.belstu.by/handle/123456789/6491
678.4.023
полимерные пленки
климатические факторы
свойства пленок
структура пленок
климатическое старение
Change of properties and structure of films derived from powder paints in the process of artificial climatic aging
oai:elib.belstu.by:123456789/64782020-10-21T07:36:41Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Fleisher, V. L.
author
Andryukhova, M. V.
author
2012
Methods of reception of fragrance substances are defined on the basis of vanillin and veratraldehyde by aldol-crotonic condensation with aliphatic and aromatic ketones (acetone, methylethylketone, heptanone-2, ?-ionone, acetophenone, p-methylacetophenone, p-acetyl-anisole). Distinctive feature of the given technique is the use of methanol as solvent and the replacement of potassium hydroxide on sodium hydroxide. For allocation of products of condensation from methanolic solution it is expedient to use 5%-s' solutions of hydrochloric acid instead of acetic acid that allows to receive purer product and raises its yield up to 80–90%. With the help of Infrared Spectroscopy the presence of the functional groups in the received substances was proved.
Fleisher, V. L. Preparative synthesis of fragrance substances based on vanillin and veratraldehyde / V. L. Fleisher, M. V. Andryukhova // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 25-28
https://elib.belstu.by/handle/123456789/6478
547.576:678.049.8
душистые вещества
препаративный синтез
ванилин
вератровый альдегид
эфиры ванилина
Preparative synthesis of fragrance substances based on vanillin and veratraldehyde
oai:elib.belstu.by:123456789/69512020-10-21T07:36:40Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Karpovich, O. I.
author
Kalinka, A. N.
author
Spiglazov, A. V.
author
Melyukh, Ye. P.
author
2012
The composition and properties of mixed polymeric wastes of accumulator batteries have been determined. The possibility of waste processing into moulded articles by pressing with preplastication has been ascertained. Physical and mechanical properties of materials from mixed polymeric wastes have been defined. Recommendations on the regimes of waste processing suitable in terms of their technological and technico-economic parameters have been worked out.
Application potential of mixed polymeric wastes of accumulator batteries for article moulding / O. I. Karpovich [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 3-6
https://elib.belstu.by/handle/123456789/6951
678.027
полимерные отходы
переработка тходов
формование изделий
Application potential of mixed polymeric wastes of accumulator batteries for article moulding
oai:elib.belstu.by:123456789/65002020-10-21T07:36:46Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Gordeiko, S. A.
author
Chernaya, N. V.
author
Kolesnikov, V. L.
author
Zholnerovich, N. V.
author
Parimonchik, E. S.
author
Atrashkevich, E. N.
author
2012
The paper studies the influence of the properties of the waste paper on the properties of a paper sheet. The obtained data demonstrate the ability of different types of waste to the dissolution and grinding. It has been shown that paper properties such as breaking length, absorbency at unilateral wetting, elongation, wet strength, breaking force of various types of fibrous materials recycled fibrous materials must be taken into consideration in paper and cardboard mills in the manufacture of paper and cardboard with a different field of application. It is concluded that the selected samples of waste paper can be recycled in paper mills of the Republic of Belarus as fibrous raw material to produce various kinds of paper.
Influence of the waste composition on the properties of paper sheets / S. A. Gordeiko [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 110-112
https://elib.belstu.by/handle/123456789/6500
646.24
макулатура
свойства бумаги
бумажный лист
вторичное волокнистое сырье
технология бумаги
технология картона
Influence of the waste composition on the properties of paper sheets
oai:elib.belstu.by:123456789/64862020-10-21T07:36:44Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Shutilin, Yu. F.
author
Karmanova, O. V.
author
Prokopchuk, N. R.
author
2012
Investigations of polydienes with various chemical structures and microstructures were carried out, and interrelations of molecular-structural characteristics of polydienes with their macroscopic properties in thermo-oxidation processes were shown. An experimental-formal approach to substantiation of cross-linking and destruction depth of carbon-chain linear polydiene macromolecules is proposed. The extrapolation value of the molecular weight of the chain ensuring activation of chemical reactions of vulcanization and oxidation was obtained. It is proposed to use the criterion of destruction for calculating the number of chain splinters resulting from macromolecule ruptures.
Shutilin, Yu. F. On thermo-fluctulation description of chemical reactions in polymers / Yu. F. Shutilin, O. V. Karmanova, N. R. Prokopchuk // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 63-66
https://elib.belstu.by/handle/123456789/6486
678.4.028
полимеры
полидиены
химические реакции
вулканизация
термоокисление
деструкция макромолекул
On thermo-fluctulation description of chemical reactions in polymers
oai:elib.belstu.by:123456789/65092020-10-21T07:36:48Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Stasevich, O. V.
author
Leontiev, V. N.
author
Kovalenko, N. A.
author
Supichenko, G. N.
author
2012
It has been presented qualitative and quantitative chromatographic analysis of hypericin containing extracts of St. John's Wort which could be used for producing drugs for treating of oncological diseases by the method of photodynamic therapy. The optimal conditions of carrying out of TLC and HPLC analysis of ethanol St. John's Wort extracts have been selected. The chromatographic separation of St. John's Wort extract has been carried out assisted by Diaion HP-20 sorbent. This separation gave the opportunity to enrich the initial extract with hypericins more than in 4 times.
Chromatographic analysis and separation of hypericin containing extract of St. john's wort / O. V. Stasevich [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 140-142
https://elib.belstu.by/handle/123456789/6509
543.544
экстракт зверобоя
зверобоя экстракт
гиперицин
хроматографический анализ
Chromatographic analysis and separation of hypericin containing extract of St. john's wort
oai:elib.belstu.by:123456789/65072020-10-21T07:36:48Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Al-Hammash, N. М.
author
Ignatenko, А. V.
author
2012
The article deals with the problem of microorganisms’ resistаnce to antibiotics at dairy farms and complexes (DFC). The aim of the work – analysis of resistance of E. coli to antibiotics used at DFC. As a result we determined the range of resistance of coli-forms to antibiotics used at the dairy complex “Zabolot” of Grodno district. It was shown that received strains of microorganisms E. coli have high resistance to the following antibiotics: oletetrin, erythromycin, polymyxin, benzylpenicillin. E. coli bacteria remained high sensitivity to ceftriaxon, sisomicin, furadonin, kanamycin, gentamicin. This fact allows to recommend these antibiotics for animals coli-bacteriosis treatment at DFC.
Аl-Hammash, N. М. Analysis of antibiotics resistance of E. coli microorganisms / N. М. Аl-Hammash, А. V. Ignatenko // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 134-136
https://elib.belstu.by/handle/123456789/6507
636.087.8:579
резистентность микроорганизмов
антибиотикорезистентность микроорганизмов
устойчивость микроорганизмов
устойчивость к антибиотикам
микроорганизмы
Analysis of antibiotics resistance of E. coli microorganisms
oai:elib.belstu.by:123456789/67032020-10-21T07:36:46Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Drapeza, A. A.
author
Chernaya, N. V.
author
Zholnerovich, N. V.
author
Yeshchenko, L. S.
author
Malitskaya, L. Yu.
author
2012
The results of the researches of the effect of composite filler on the properties of the composite polygraphic cardboard NVP-0.5 obtained in JSC «Slonim cardboard-paper mill «Albertin» on a cardboard machine CM-2 are presented in the article. The proposed composite filler is obtained from available raw materials and makes it possible to replace the imported (kaolin) completely. It is shown that the filler allows to increase whiteness of the polygraphic cardboard NVP-0.5 by 5–8% and that of the ash content in structure by 17.6–18.2%.
The use of composite filler in the production of polygraphic cardboard in jsc “Slonim cardboard-paper mill “Albertin” / A. A. Drapeza [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 107-109
https://elib.belstu.by/handle/123456789/6703
676.024.73
полиграфический картон
картон полиграфический
композиционные наполнители
технология картона
The use of composite filler in the production of polygraphic cardboard in jsc “Slonim cardboard-paper mill “Albertin”
oai:elib.belstu.by:123456789/69532020-10-21T07:36:42Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Chernetskaya, Yu. G.
author
Lamotkin, S. A.
author
Trukhachyova, T. V.
author
2012
The results of the study of hydrogel matrix stability by means of nuclear magnetic resonance spectroscopy are described in the article. Ionizing radiation effect on auxiliary substances and active ingredients of hydrogel polymeric matrixes have been studied. It has been proved that under the influence of high-velocity electrons at absorbed doses 25–35 kGy the formation of a three-dimensional polymeric structure of the matrix occurs. It has been ascertained that active ingredients of hydrogels miramistin and gentamycin are stable under absorbed radiation doses in the range 5–35 kGy.
Chernetskaya, Yu. G. Application of NMR spectroscopy in predicting hydrogel matrix stability by “stress” testing method / Yu. G. Chernetskaya, S. A. Lamotkin, T. V. Trukhachyova // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 12-14
https://elib.belstu.by/handle/123456789/6953
543.429.23:615.038
ЯМР-спектроскопия
гидрогели
гидрогелевые матрицы
полимерные матрицы
стресс-тестирование
Application of NMR spectroscopy in predicting hydrogel matrix stability by “stress” testing method
oai:elib.belstu.by:123456789/69522020-10-21T07:36:42Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Kordikova, Ye. I.
author
Spiglazov, A. V.
author
Dubovik, I. N.
author
Cherenkevich, A. S.
author
2012
The possibility of the use of ground fibreglass wastes as fillers and thermosetting resins as binders to manufacture the articles for household and constructive use have been studied. Parameters of the mechanical properties of materials with different fraction composition have been determined. Influence of the mechanical action on particle size has been studied. Experimental test for checking the possibility of component combination has been carried out. Quality of materials has been examined. Recommendations for the use of the existing technologies in the manufacture of articles have been worked out. The obtained results can be used in developing product design, in determining the areas and conditions of their effective application as well as in choosing technologies for their processing.
Structure and properties of composite materials from fibreglass wastes and thermosetting binder / Ye. I. Kordikova [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 7-11
https://elib.belstu.by/handle/123456789/6952
678.6
композиционные материалы
термореактивные полимеры
стекловолокнистые отходы
формование изделий
Structure and properties of composite materials from fibreglass wastes and thermosetting binder
oai:elib.belstu.by:123456789/67062020-10-21T07:36:47Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Nikolaychik, I. V.
author
Zholnerovich, N. V.
author
Chernaya, N. V.
author
Kolesnikov, V. L.
author
2012
The comparative analysis of the received experimental data testifies that, properties of printing cardboard essentially depend on structure and the weight of one square meter of its elementary layers. We defined the preferable structure of top layer (40% of bleached softwood sulphate cellulose and 60% of white paper for recycling of mark МB-1), intermediate layer (40% of bleached softwood sulphate cellulose and 60% of white paper for recycling of mark МB-2) and primary layer (60% of modular paper for recycling of mark МС-5B and 40% of white paper for recycling of mark МB-1), the layers differ in the weight of one square meter. The printing cardboard possesses the demanded physicomechanical characteristics corresponded to ТURB 00280146.030-98 in that case when the weight of one meter square is 60 g for the top layer, 50 g for the intermediate and 130 g for the primary layer.
The influenсe of structure and the weight of one square meter of elementary layers on properties of printing cardboard / I. V. Nikolaychik [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 117-119
https://elib.belstu.by/handle/123456789/6706
646.24
полиграфический картон
картон полиграфический
массоемкость картона
структура картона
The influenсe of structure and the weight of one square meter of elementary layers on properties of printing cardboard
oai:elib.belstu.by:123456789/64822020-10-21T07:36:43Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Zhuravleva, M. V.
author
Krutko, E. T.
author
Zharskaya, T. A.
author
2012
The paper presents the results of a comprehensive study of changes in the properties of filmforming compositions based on epoxydiane oligomer. Curing was carried out by a modified hardener. The degree of structurization changes depending on the amount of the hardener. The effect of timetemperature conditions, ratio of initial oligomers, and nature of the solvent on the process of epoxydiane resin curing by modified polyamide was determined.
Zhuravleva, M. V. Curing of epoxydiane resins by modified hardener of amine type / M. V. Zhuravleva, E. T. Krutko, T. A. Zharskaya // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 41-45
https://elib.belstu.by/handle/123456789/6482
667.633.2
эпоксидные смолы
отверждение смол
пленкообразующие композиции
эпоксидные олигомеры
отвердители
Curing of epoxydiane resins by modified hardener of amine type
oai:elib.belstu.by:123456789/67012020-10-21T07:36:46Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Baulin, I. S.
author
Yatsenko, V. V.
author
Kasperovich, O. M.
author
2012
The possibility of application of composite sheet materials on the basis of acrylonitrile-butadienstyrene plastics (ABS-plastics) for production of details of the exterior and interior parts of roadbuilding equipment by a method of a positive thermoformation has been investigated in the article. It was of a great interest to estimate physicomechanical properties of composite ABSplastic formable products, to study the influence of technological parameters of a termoformation on operational properties of details. Objects of research are the multilayered sheet products received by a method of positive thermoformation. The resistance of ABS-plastics in the conditions of practical use has also been investigated.The authors have made recommendations on the use of thermoformed ABS-plastic details for manufacturing of road-building technics.
Baulin, I. S. Thermoformation of composite sheets on the basis of abs – plastics with high surface luster / I. S. Baulin, V. V. Yatsenko, O. M. Kasperovich // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 113-116
https://elib.belstu.by/handle/123456789/6701
678.046:539.612
листовые материалы
композиционные материалы
АБС-пластики
акрилонитрил-бутадиен-стирольные пластики
термоформование
Thermoformation of composite sheets on the basis of abs – plastics with high surface luster
oai:elib.belstu.by:123456789/64892020-10-21T07:36:44Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Shutilin, Yu. F.
author
Kazakova, A. S.
author
Karmanova, O. V.
author
Kasperovich, A. V.
author
2012
Synthetic isoprene rubber (SIR) is similar in structure and to the properties of natural rubber (NR). Currently, it can almost completely replace NR in the production of automobile tires and rubber products. An urgent task is to study the aging processes of polymers and their products, assess the impact of various factors on the oxidative stability of polymers and the selection of effective ways to protect polymers from aging. We simulated aging of inhibited (commodity) and reprecipitation (purified) polyisoprene.
Simulation of polidiene oxidation kinetics / Yu. F. Shutilin [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 58-62
https://elib.belstu.by/handle/123456789/6489
678.4.023
синтетические каучуки
изопреновые каучуки
старение полимеров
окислительная устойчивость
Simulation of polidiene oxidation kinetics
oai:elib.belstu.by:123456789/69552020-10-21T07:36:42Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Gaidukevich, O. A.
author
Skakovsky, Ye. D.
author
Tychinskaya, L. Yu.
author
Zveryeva, T. D.
author
Dicusar, Ye. A.
author
Lamotkin, S. A.
author
2012
Thermolysis of benzoyl and acetylbenzoyl peroxides in methanol-d4 under temperature and microwave radiation treatment was studied. It was shown that chemical induced dynamic nuclei polarization can be observed even when reaction is carried out in spectrometers with high magnetic fields. In this case spin correlation in geminate radical pairs with labile aceloxy radicals persists. Equal quantity of products is obtained independent of the way of peroxide decomposition initiation. Homolysis proceeds according to chain mechanism. Contribution of induced decomposition decreases while reaction proceeding. Molecules of dissolved oxygen terminate the chain effectively, decreasing the rate of the reaction of peroxide decomposition. In the case of acetylbenzoyl yield of products depends of initiation mechanism: under microwave radiation treatment molecules of solvent are more active, but dissolved oxygen is less active than under thermolysis condition.
Comparative analysis of diacylated peroxide methanol solution decomposition under temperature and microwave radiation / O. A. Gaidukevich [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 15-19
https://elib.belstu.by/handle/123456789/6955
547.29.39:547.261:544.431.4:533.9.082.74+543.429.23
органические пероксиды
разложение пероксида бензоила
разложение пероксида ацетилбензоила
СВЧ-изучение
микроволновое излучение
термолиз пероксидов
Comparative analysis of diacylated peroxide methanol solution decomposition under temperature and microwave radiation
oai:elib.belstu.by:123456789/64792020-10-21T07:36:41Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Andryukhova, M. V.
author
Fleisher, V. L.
author
Chernysheva, T. V.
author
Gordeiko, S. A.
author
Makarov, D. S.
author
2012
Fumaric acid polyamids were synthesized by interaction of fumaric acid with polyamines (diethylenetriamine, triethylenetetramine) by equilibrium polycondensation in the melt. The obtained products are promising as hardening additives in the technology of paper and cardboard. This article studies the type and rate effects of fumaric acid polyamides on some paper strength properties (breaking length, breaking force in dry and wet states). It is shown that the greatest effect of the paper hardening is achieved by using the additive, which is a product of polycondensation of fumaric acid and diethylenetriamine.
Fumaric acid amides in technologies of paper and cardboard / M. V. Andryukhova [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 29-31
https://elib.belstu.by/handle/123456789/6479
542.951.1:547.462.3
фумаровая кислота
технология бумаги
технология картона
равновесная поликонденсация
амиды
Fumaric acid amides in technologies of paper and cardboard
oai:elib.belstu.by:123456789/64972020-10-21T07:36:46Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Petrushenia, A. F.
author
Revyako, M. M.
author
2012
We propose the possibility of obtaining layered composite materials on the basis of based on woodveneer with the use of thermoplastic polyolefin film binders and a copolymer of ethylene with vinyl acetate. A method for increasing the adhesion of polymer compositions to wood filler was specified. The effect of modification on the strength of the composition of the material was studied. The test results of physical and mechanical properties of composite materials obtained by using the modified films were shown.
Petrushenia, A. F. Application of modified films in the production of wood-plastic layered materials / A. F. Petrushenia, M. M. Revyako // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 103-106
https://elib.belstu.by/handle/123456789/6497
678.042
композиционные материалы
пленки модифицированные
древесные пластики
древесно-слоистые пластики
Application of modified films in the production of wood-plastic layered materials
oai:elib.belstu.by:123456789/64812020-10-21T07:36:42Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Zhuravleva, M. V.
author
Krutko, E. T.
author
2012
The results of studies on the synthesis of modified by oil alkyd resin with the use of bicyclo [2,2,2] oct5-ene-2,3-dicarboxylic acid anhydride as acylation agent in the polycondensation reaction with polyols for obtaining lacquer coatings and the study of their operational properties are presented in this article. It is found that the chemical modification of alkyd resin by replacing phthalic anhydride on bicyclic dicarboxylic acid anhydride allows to increase hardness, strength, adhesion of coatings formed on steel substrates.
Zhuravleva, M. V. Synthesis of alkyd oligomers based on bicyclo[2,2,2] oct-5-ene-2,3-dicarboxylic acid anhydride and its application for obtaining lacquer coatings / M. V. Zhuravleva, E. T. Krutko // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 36-40
https://elib.belstu.by/handle/123456789/6481
667.635.5
дикарбоновые кислоты
бициклические кислоты
ангидриды
алкидные смолы
лаковые покрытия
бицикло[2,2,2]окт-5-ен-2,3-дикарбоновая кислота
Synthesis of alkyd oligomers based on bicyclo[2,2,2] oct-5-ene-2,3-dicarboxylic acid anhydride and its application for obtaining lacquer coatings
oai:elib.belstu.by:123456789/65032020-10-21T07:36:47Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Zholnerovich, N. V.
author
Caputsky, F. N.
author
Chеrnaya, N. V.
author
Shiman, D. I.
author
Lesun, L. A.
author
Kasperovich, Y. V.
author
2012
The article is devoted to investigation of reinforcement effeiciency of the agents received on the basis of styrene copolymers and maleic anhydride on the properties of paper made of recycled pulp. It was established that for modification of styrene copolymers it is resonable to use NH4OH. Preferred content of maleic anhydride is 20?22 mol. %. The molecular weight of maleic anhydride copolymers should be in the range of 5,500?6,500 c. u. The reinforcement of styrene copolymers is manifested when the content of them in fibrous slurry is 0.5% of the mass of a. d. s. Drying temperature (120±2?C) increases this effect, the strength of paper samples testifies it.
Application of the modified styrene copolymers for reinforcement of recycled pulp paper / N. V. Zholnerovich [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 120-123
https://elib.belstu.by/handle/123456789/6503
676.038.22
сополимеры стирола
малеиновый ангидрид
свойства бумаги
химические добавки
прочность бумаги
Application of the modified styrene copolymers for reinforcement of recycled pulp paper
oai:elib.belstu.by:123456789/64952020-10-21T07:36:45Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Prokopchuk, N. R.
author
Gorshcharik, N. D.
author
Kluev, A. Yu.
author
Kozlov, N. G.
author
Rozhkova, E. I.
author
Latishevich, I. A.
author
2012
The research result of the modified rosin as a component of model compositions for precision cast-ing is given in the article. The last five years successes in producing the latest products from rosin are reached. New rosin products essentially differ from rosin by physi cal and chemical properties possess certain advantages enable to expand the sphere of introduction and level rosin shortcomings. Therefore development and research of new model compositions for precision casting taking into account the achievements in the field of secondary rosin product synthesis is an actual task and promotes decelerat-ing elimination in this area from foreign analogues.
Research of modified rosin usability in model compositions for precision molding / N. R. Prokopchuk [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 88-99
https://elib.belstu.by/handle/123456789/6495
621.74.045
модельные композиции
литье
модельные составы
составы модельные
канифоль модифицированная
канифольные продукты
Research of modified rosin usability in model compositions for precision molding
oai:elib.belstu.by:123456789/65052020-10-21T07:36:47Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Dubodelova, E. V.
author
Sychova, N. A.
author
Khmyzov, I. A.
author
Snopkova, T. A.
author
Solovyeva, T. V.
author
2012
The present researches are aimed at studying the physical and mechanical properties of pellets produced from hardwood. For the experiment black alder and birch widespread on the territory of the Republic of Belarus hardwood timber has been chosen. It is stated that the use of wood in an unaltered form is impractical because the pellets derived from them have a low mechanical strength. The technological solution of this problem was the treatment of crushed wood raw material by saturated steam. The results of industrial tests confirmed that wood particles activation of hardwood fuel pellets gives the required quality standard. Technical feature of the technology is the use of a matrix with the length of the pressing channel 33 mm.
Technology features of fuel pellets from deciduous wood / E. V. Dubodelova [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 127-129
https://elib.belstu.by/handle/123456789/6505
674.81
топливные пеллеты
древесина лиственных пород
твердое биотопливо
Technology features of fuel pellets from deciduous wood
oai:elib.belstu.by:123456789/64902020-10-21T07:36:44Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Baulin, I. S.
author
Yatsenko, V. V.
author
Mikhalyonok, S. G.
author
Kuz’menok, N. M.
author
Кoval’chuk, T. A.
author
Nesterova, S. V.
author
But’ko, T. A.
author
2012
The possibility of newly synthesized pyrazole derivatives using as heat stabilizers of high-pressure polyethylene (LDPE): 1-acetyl-4-methyl-3(5)-(2-(3-nitrophenyl)vinyl)-1H-pyrazole (additive 1) and 4benzoyl-3-(2-(4-nitrophenyl)vinyl-5-phenyl-1-tosyl-1H-pyrazole (additive 2)) has been studied. It is established that the introduction of additive 1 or 2 in the amount of 0,05-0,10 wt % to the high-pressure polyethylene leads to the increasing of such physical-mechanical properties of the samples as tensile strength by 1,2–1,5 times and elongation by 2,3–3,0 times in comparison with the unstabilized sample. Synthesized substances are more effective than Tioalkofen MBP used in industry.
Pyrazole derivatives as polyethylene oxidative destruction stabilizers / I. S. Baulin [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 67-70
https://elib.belstu.by/handle/123456789/6490
541.64:678.01
полиэтилен высокого давления
производные пиразола
термостабилизаторы
Pyrazole derivatives as polyethylene oxidative destruction stabilizers
oai:elib.belstu.by:123456789/65112020-10-21T07:36:49Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Stasevich, O. V.
author
Kovalenko, N. A.
author
Supichenko, G. N.
author
Leontiev, V. N.
author
2012
The paper deals with development of the effective mode of isolation of hypericins from St. John's Wort including Soxhlet extraction with ethanol as a solvent. In Central Botanical Garden of the NAS of the RB were found out the kinds of St. John's Wort, which contain the largest amounts of hypericins. They may be used as material for producing of phytopreparations and drugs for treating oncological diseases by the method of photodynamic therapy.
Extraction isolation of hypericins from particular kinds of St. john's wort (hypericum perforatum) / O. V. Stasevich [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 143-145
https://elib.belstu.by/handle/123456789/6511
542.61
экстракт зверобоя
зверобоя экстракт
выделения гиперицинов
зверобой продырявленный
зверобой обыкновенный
Extraction isolation of hypericins from particular kinds of St. john's wort (hypericum perforatum)
oai:elib.belstu.by:123456789/65062020-10-21T07:36:48Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Pismenskiy, P. I.
author
Luka, Yu. G.
author
Dubodelova, E. V.
author
Solovyeva, T. V.
author
2012
The article represents the results of researches that allow to establish the appropriateness of usage of aspenwood modified by sodium monosulphite as a raw material for thermomechanical pulp (TMP) in newsprint production. Replacement of 30% of sprucewood by aspen using 1% consumption of sodium sulphite permits to achieve strength of samples of unbleached TMP 4510 m, which ensures the highest demands to newsprint. In this case the process of wood grinding accelerates and the reactivity of hemicelluloses and lignin increases.
Chemical activation of aspenwood components in the production of thermomechanical pulp / P. I. Pismenskiy [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 130-133
https://elib.belstu.by/handle/123456789/6506
676.18
676.189
древесина осины
термомеханическая масса
газетная бумага
бумага газетная
Chemical activation of aspenwood components in the production of thermomechanical pulp
oai:elib.belstu.by:123456789/65082020-10-21T07:36:48Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Oliferchik, А. P.
author
Al-Hammash, N. M.
author
Kuchminskaya, A. S.
author
Ignatenko, A. V.
author
2012
The article is devoted to the problems of detection of residual quantities of antibiotics and inhibitors in raw milk. It was analyzed the following microbiological methods: substances diffusion into agar, reductase probe, biocalorimetry and biotesting of microalgae motion. In the publication was shown that methods of biocalorimetry and biotesting of Euglena gracilis motion allow to increase sensitivity of antibiotics detection and to decrease time and labour inputs for analyses. These methods may be recommended for practical application at dairy farms and dairy processing enterprises.
Methods of residual quantities of antibiotics and inhibitors detection in raw milk / А. P. Oliferchik [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 137-139
https://elib.belstu.by/handle/123456789/6508
628.356
обнаружение антибиотиков
микробиологические методы
антибиотики
ингибирующие вещества
молочная продукция
Methods of residual quantities of antibiotics and inhibitors detection in raw milk
oai:elib.belstu.by:123456789/64802020-10-21T07:36:41Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Kostyuchenko, M. A.
author
Revyako, M. M.
author
2012
The article describes the effect of a synergetic mixture of triazine compounds and red phosphorus on combustibility, physical, mechanical and operational properties of polymeric compositions based on polyamide-6 modified by ethylene-1-octene copolymer. Optimum on structure and final properties this polyamide composition is offered to be used in the manufacture of corrugated tubes for electric harness.
Kostyuchenko, M. A. Investigation of the effect of combined flame retardants “phosphorus + triazine” on combustibility and operational properties of extrusion-type polyamides / M. A. Kostyuchenko, M. M. Revyako // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 32-35
https://elib.belstu.by/handle/123456789/6480
678.2:614.841.41
полимерные композиции
полиамиды
антипирены
фосфор
триазиновые соединения
горючесть
эксплуатационные свойства
Investigation of the effect of combined flame retardants “phosphorus + triazine” on combustibility and operational properties of extrusion-type polyamides
oai:elib.belstu.by:123456789/64942020-10-21T07:36:45Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Polonik, V. D.
author
Prokopchuk, N. R.
author
Shashok, Zh. S.
author
2012
The effect of PTFE F4 and the product of thermal gas-dynamic synthesis “Forum” on the technical properties of the elastomer compositions based on butadiene-nitrile rubber NBR-18 are investigated. The addition of modifying agents improves following characteristics: the heat-ageing resistance of vulcanized rubber, swelling resistance in hydrocarbon liquids and abrasion resistance of elastomeric compositions.
Polonik, V. D. Technical properties of elastomer compositions on the basis of butadiyen-nitril of rubber modified by politetraftoretilen / V. D. Polonik, N. R. Prokopchuk, Zh. S. Shashok // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 85-87
https://elib.belstu.by/handle/123456789/6494
678.074
эластомерные композиции
политетрафторэтилен
бутадиен-нитрильные каучуки
Technical properties of elastomer compositions on the basis of butadiyen-nitril of rubber modified by politetraftoretilen
oai:elib.belstu.by:123456789/64922020-10-21T07:36:45Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Morev, F. V.
author
Prokopchuk, N. R.
author
Krutko, E. T.
author
2012
Epoxy resin compositions modified by compounds containing isocyanate fragments are recently of considerable scientific and practical interest. However, only some of them are widely used. Urethane fragments in the molecular structure of epoxy units of oligomeric molecules cause the improvement of the deformation-strength properties of polymer materials. The aim of this work is the development and study of film-forming composites with improved physical, mechanical and chemical properties by modifying the epoxy oligomers by the polyisocyanates.
Morev, F. V. Modification of epoxy resins by polyisocyanates / F. V. Morev, N. R. Prokopchuk, E. T. Krutko // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 77-80
https://elib.belstu.by/handle/123456789/6492
667.633.2
эпоксидные смолы
пленкообразующие композиты
полимерные материалы
Modification of epoxy resins by polyisocyanates
oai:elib.belstu.by:123456789/69562020-10-21T07:36:40Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Emello, G. G.
author
Bondarenko, Zh. V.
author
Grukalova, Ye. V.
author
Firsova, L. D.
author
2012
The surface-active and colloid-chemical properties of surfactant technical specimens Genapol LRO, Texapon K12G, TWEEN 20, TWEEN 80 and Cremophor A25 have been studied using different methods of analysis. The surface activity, adsorption, micelle formation and solubilization quantitative characteristics have been determined, hydrophilic-lipophilic balance has been calculated. It has been shown that the usage of the investigated specimens in cosmetic compositions is related to with their surface-active and colloid-chemical properties determining their function in cosmetics (stabilizer, emulsifier, solubilizer and others).
Colloid-chemical properties of surfactant technical specimens used in cosmetics industry / G. G. Emello [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 20-24
https://elib.belstu.by/handle/123456789/6956
544.77:661.185
поверхностно-активные вещества
технические препараты
косметические средства
коллоидно-химические свойства
Colloid-chemical properties of surfactant technical specimens used in cosmetics industry
oai:elib.belstu.by:123456789/64842020-10-21T07:36:43Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Karmanova, О. V.
author
Molchanov, V. I.
author
Shashok, Zh. S.
author
2012
A new approach of describing kinetics of curing was proposed. This allowed for formal adjustment of the previously proposed scheme of vulcanization, application of a mathematical model to kinetic curves of any shape and analytical evaluation of isothermal cure kinetics on the basis of economical laboratory experiments. The method of studying kinetics of vulcanization is based on the assumption that individual stages of the vulcanization process significantly differ in speed. To determine rate constants for individual stages the rheometric curve was divided into some areas. It allowed to use only a specific set of ordinary coupled reactions of the first and second order for describing vulcanization of rubbers under analysis. Software for solving direct and inverse problems of the kinetics of isothermal cure was developed.
Karmanova, О. V. On solving the problem of kinetics of vulcanization with the use of numerical methods / О. V. Karmanova, V. I. Molchanov, Zh. S. Shashok // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 50-52
https://elib.belstu.by/handle/123456789/6484
678.4.028
кинетика отверждения
изотермическая вулканизация
кинетика вулканизации
On solving the problem of kinetics of vulcanization with the use of numerical methods
oai:elib.belstu.by:123456789/64832020-10-21T07:36:43Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Vishnevskij, K. V.
author
Shashok, Zh. S.
author
2012
The effect of carbon nanomaterial (CNM) obtained in high-voltage discharge plasma on properties of elastomeric compositions is investigated. Some tests to determine tensile strength, stretching strain, abrasion resistance, hardness, fatigue endurance and resistance to heat ageing and swelling in aggressive medium of highly filled rubbers based on raw rubber for general and special application are carried out. Parameters of the vulcanization network of the samples are determined by the method of equilibrium swelling. It is shown that CNM addition permits to improve performance characteristics of elastomers based on butadiene-acrylonitrile rubber.
Vishnevskij, K. V. Usage of high-dispersion carbon additives into elastomer compositions based on rubbers of various applications / K. V. Vishnevskij, Zh. S. Shashok // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 46-49
https://elib.belstu.by/handle/123456789/6483
678.4.04
углеродные наноматериалы
эластомерные композиции
высоконаполненные резины
каучуки
Usage of high-dispersion carbon additives into elastomer compositions based on rubbers of various applications
oai:elib.belstu.by:123456789/64932020-10-21T07:36:45Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Shrubok, A. O.
author
Grushova, E. I.
author
Nesterova, S. V.
author
2012
The effect of modification of tar by iron (III) stearate on the rate of the oxidation process and the quality of oxidized bitumen has been studied. The dependences of the softening temperature of bitumen upon the oxidation time, the dynamic viscosity of bitumen on the temperature have been obtained. Penetration, penetration index, group composition and thermal-oxidative stability of oxidized bitumen modified by iron (III) stearate have been determined. It was determined that small quantities of a modifier (up to 1.5 wt %) in the raw material don’t influence the rate of oxidation, and with increasing content of the modifier in the raw material the rate of the process is increased by 1.6–4.0 times.
Shrubok, A. O. The oxidized bitumens from the modified raw materials / A. O. Shrubok, E. I. Grushova, S. V. Nesterova // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 81-84
https://elib.belstu.by/handle/123456789/6493
665.637.8
окисленные битумы
устойчивость битумов
термоокислительное старение
модифицированное сырье
The oxidized bitumens from the modified raw materials
oai:elib.belstu.by:123456789/64852020-10-21T07:36:43Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Sedykh, V. А.
author
Shcherbakov, V. N.
author
Proskurin, G. V.
author
Uss, Е. P.
author
2012
Dependence of thermal shrinkage of films based on polyvinylchloride (PVC) on temperature is established. The technique of determining PVC film shrinkage speed within a wide interval of temperatures is developed. The effect of the content of the plasticizer and heat treatment on the physicomechanical parameters of PVC films is shown. The influence of the duration of mixing the components of the mix on physico-mechanical parameters of PVC films is established. Linear equations of regression of temperature rise kinetics in the course of mixing the ingredients in a high-speed agitator and those of subsequent kinetics of cooling the mix at mixing are obtained.
Properties of thermoshrinked films based on polyvinylchloride / V. А. Sedykh [et al.] // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 53-57
https://elib.belstu.by/handle/123456789/6485
678.029.46
термоусадочные пленки
пленки ПВХ
термообработка пленок
термическая усадка
Properties of thermoshrinked films based on polyvinylchloride
oai:elib.belstu.by:123456789/64962020-10-21T07:36:46Zcom_123456789_20520com_123456789_118col_123456789_20521
00925njm 22002777a 4500
dc
Utgof, S. S.
author
Ignatovich, L. V.
author
Romanova, A. M.
author
2012
This article presents one of the promising ways of wear resistance improvement of nanoadditives modification coatings. The protective and decorative coating, composed of nanoadditives, was used to make samples. Testing samples showed that the use of nanoadditives improves coating operational characteristics, or wear resistance in this case. The dependence of wear resistance coatings on the flow nanoadditives was studied.
Utgof, S. S. Application of nanoadditives for wear resistance improvement of parquet protective and decorative coatings / S. S. Utgof, L. V. Ignatovich, A. M. Romanova // Proceedings of BSTU. Issue 4 : Chemistry, organic substances technology and biotechnology. – Minsk : BSTU, 2012. – P. 100-102
https://elib.belstu.by/handle/123456789/6496
692.53+811
лакокрасочные покрытия
защитно-декоративные покрытия
нанодобавки
износостойкость покрытий
Application of nanoadditives for wear resistance improvement of parquet protective and decorative coatings