Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс:
https://elib.belstu.by/handle/123456789/62617
Название: | Effect of surface modification of 5KHV2S steel on the mechanism and intensity of contact wear |
Авторы: | Naizabekov, A. Stepankin, I. Pozdnyakov, E. Lezhnev, S. Kuis, D. Panin, E. |
Ключевые слова: | steel 5KHV2S wear surface layers pulsing contact loads nitrocementation сталь 5KHV2S износ поверхностные слои пульсирующие контактные нагрузки |
Дата публикации: | 2024 |
Библиографическое описание: | Effect of surface modification of 5KHV2S steel on the mechanism and intensity of contact wear / A. Naizabekov [et al.] // Metalurgija. - 2024. - Vol. 2. - P. 279-282. - Bibliogr.: 5 nam. - il., tabl. |
Краткий осмотр (реферат): | The paper presents the experimental study of the contact wear of 5KHV2S steel after surface modification. It is shown that without hardening of the surface layer, 5KHV2S steel is capable of satisfactory operation when a pulsating contact stress of 970 MPa is applied. The most qualitative type of surface modification is the hardening of the surface layer by nitrocementation carried out before quenching and tempering. The proposed technology of volumetricsurface hardening, including forging in a new forging tool, chemical-thermal treatment, quenching and lowtemperature tempering, provided the possibility of increasing the pulsating contact stress to 1 100 MPa, and the operation period during the first 13 000 loading cycles gives wear of the working surface no more than 0,1 mm. |
URI (Унифицированный идентификатор ресурса): | https://elib.belstu.by/handle/123456789/62617 |
Располагается в коллекциях: | Публикации в зарубежных изданиях |
Файлы этого ресурса:
Файл | Описание | Размер | Формат | |
---|---|---|---|---|
Naizabekov A. Effect of surface modification.pdf | 224.86 kB | Adobe PDF | Просмотреть/Открыть |
Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.